CSA Approved heavy duty 9″ disc and 6″ x 48″ belt sander with stand
Remember when your sander was a stander? Smooth out intricate contours or remove material quickly with the ALLWIN 6 x 48-inch belt and 9-inch disc sander with stand. The spacious disc table bevels up to 45 degrees while the belt tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular project. The heavy-duty body provides enough weight to prevent walking and vibration during use while the steel stand keeps sanding surfaces elevated over three feet off the ground.
The ALLWIN 6 x 48-inch belt sander with 9-inch disc and stand provides users the versatility of smaller sanders with the capacity of larger industrial models. Remember when you could sand even the largest of work pieces? Remember ALLWIN.
1. This 2 in 1 combination sanding machine contains 6 * 48 inch belt and 9 inch disc. Equips 1.5hp powerful and dependable performance induction motor.
2.Disc side Al. work table with miter gauge can be used for belt and disc .
3.Belt fast tracking design is helpful to raise working efficiency.
4.Optional open floor stand can increase the height and facilitate operation.
1.Heavy duty cast iron base and motor, long working life
2.Belt fast tracking design
The belt fast tracking design helps easy and quickly adjust the sanding belt straight running.
3.Sand belt and disc with adjustable angle table
Polish wood with different angle on either belt or disc
|Motor||1.5hp, 3600RPM @ 60Hz.
1100W, 2850RPM @ 50Hz。
|Belt Size||6” x 48”(150 x 1220mm)|
|Disc paper and belt paper girt||80#|
|Table tilting range||0-45°|
|Base material||Cast iron|
Net / Gross weight: 45 / 49.5 kg
Packaging dimension: 720 x 630 x 345 mm
20“ Container load: 193 pcs
40“ Container load: 401 pcs
40“ HQ Container load: 451 pcs